Astondoa 66
New Interior Flooring

The floor was cut from 1/4" Teak and Holly Plyood and was pre varnished in the shop with three coats of varnish.

It was then glued down with epoxy and affixed with clamps and battens. A tinted epoxy cove was added at the perimeter of the floor to keep water from migrating under the plywood.

Once the epoxy had cured another 4 coats of varnish were applied. A further two coats of semi-gloss varnish were applied so that the new floor would match the existing.



Home  |   Projects   |   Contact  |   Principals